Husqvarna WS440HF Workshop Manual page 87

7
9
10
11
REPAIR INSTRUCTIONS
8
WS482
WS482
12
WS482
7� The clutch shaft gear wheels and
shafts are marked at the periphery�
They must have a position relative
to each other during assembly�
The clutch shafts must also have
a specific position adjacent to the
gear wheel�
8� Insert the second clutch gear shaft�
9� Make sure the timing marks on
the clutch shaft align with the
timing marks on the gear shaft�
10� Make sure that each shaft is
aligned along an imaginary line�
11� Make sure that you can shift to
first gear while turning any shaft
back and forth�
12� Insert the bearings on the shafts�
WS482
10.2
87