Assemble The Motor - Husqvarna WS440HF Workshop Manual

10.3
1
3
5
7
1 1 0
REPAIR INSTRUCTIONS
2
4
6

Assemble the Motor

First see: Dismantle the Motor (p.
106)
1� Carefully seal with silicone
between the cables to ensure that
no water can get into the motor�
2� Lubricate and replace the O-ring�
3� Lubricate and fit the two wave
washers�
4� Apply Loctite 577 or Loctite
5400 to the screws threads� Push
down the cover and fit the screws.
Tighten the screws alternately all
around�
5� Retighten the cable seal�
6� Reassemble the motor bracket�
Apply Loctite 577 or Loctite 5400
to the screws�
7� Lubricate and replace the O-ring�