Power Save Mode - Mitsubishi Electric MR-WX627Z Operating Instructions Manual

Detail Setting

Power Save Mode

The cold air in unused compartments is saved, allowing energy to be positively saved.
Power Save Mode
This function reduces
freezing capability of the ice
making compartment and
versa compartment for the
purpose of power saving.
If the ice making compartment is set to Power Save Mode, ice making will stop and ice will no longer be able to
be stored. Empty the water from the water tank as well as the water and ice from the ice tray and the ice storage
box. Pages 26 - 27
To Set
1 Touch
2 Repeatedly touch
3 Touch
the buzzer sounds.
will blink.
4 Repeatedly touch
The lit compartment is set to Power Save Mode.
The display changes in the order shown in the right each time the button is touched.
Power Save Mode is disabled at the time of purchase.
5 Touch
The buzzer will sound and
the setting is fi nished.
If the ice making compartment is set,
* If 30 seconds pass without touching
performing any settings.
To Cancel the Setting
Example of when cancelling
Power Save Mode for the ice
making compartment
1 Touch
2 Repeatedly touch
3 Touch
goes off when the setting is cancelled.
The setting will also be cancelled during the procedure to enable the setting if the step
and
24
on the operation panel
to light up
and at the same time for at least 3 seconds until
to light up the compartment to set
represents a blinking display.
will change from blinking to staying lit, and then
on the operation panel
to light up the compartment to cancel
are blinking in the step 4
1
Blinks while being set.
After setting is completed,
it lights up.
or .
is displayed.
, the display will return to
1
It will disappear
if cancelled.
.
2 3 4 3
Blinking
Cancel
Set to ice making
compartment
Set to versa
compartment
Set to ice making compartment
and versa compartment
2
without
2
5 is performed while
5
3