Acer Veriton 3000 Service Manual page 57

Parameter
Total Memory
1st Bank
2nd Bank
Serial Port 1
Serial Port 2
Parallel Port
PS/2 Mouse
Chapter 2
Description
Specifies the total amount of onboard memory.
The memory size is automatically detected by
BIOS during the POST. If you install additional
memory, the system automatically adjusts this
parameter to display the new memory size.
Indicates the type of DRAM installed in the RIMM
1 socket. The None setting indicates that there is
no DRAM installed.
Indicates the type of DRAM installed in the RIMM
2 socket. The None setting indicates that there is
no DRAM installed.
Shows the serial port 1 address and IRQ settings.
Shows the serial port 2 address and IRQ settings.
Shows the parallel port address and IRQ settings.
Indicates if there is a mouse connected to your
system. This is automatically detected by BIOS.
Format
Memory size in MB
RIMM type, capacity in MB
RIMM type, capacity in MB
Address, IRQ
Address, IRQ
Address, IRQ
Displays Installed if there is
a mouse detected;
otherwise, it displays None.
25