Acer Veriton 3000 Service Manual page 38

Parameter
System Wake-up Event
Modem Ring Indicator
PCI Power Management
Restart on AC/ Power Failure
ACPI Sleep State
Chapter 2
Description
Lets you specify the activity that will resume
the system to normal operation.
Wakes the system from Sleep mode once
any fax/modem activity is detected.
Allows the system to be awaken by the PME
function.
When power failure occurs and this setting
is enabled, the system will be turned on,
when the power comes back, if the system
was on.
When power failure occurs and this setting
is disabled, the system remains off when the
power comes back, even the system was on
before power failure occurs.
In S1 state, all clocks in the system will be
stopped, except the RTC clock.
In S3 state, all system context will be lost
except data in system memory.
Options
Enabled or Disabled
Enabled or Disabled
Disabled
Pre-State
Always-On
S1 or S3
33