Baofeng Pofung P10UV Series User Manual page 29

With this function, you can activate the frequency hopping system, improve the anti-interference ability of the radio, and
reduce the risk of being monitored.
(16) Voice prompts function (Voice) - MENU No. 15
With this function, you activate a voice that informs you about any operation/ selection you are doing.
(17) DTMFST (DTMFST) - MENU No.16
Determines when DTMF Side Tones can be heard from the transceiver speaker. You can choose amongst four options:
• OFF:
No DTMF Side Tones are heard
• DT-ST :
Side Tones are heard only from manually keyed DTMF codes
• ANI-ST:
Side Tones are heard only from automatically keyed DTMF codes
• DT+ANI:
All DTMF Side Tones are heard
(18) Signal code (S-CODE) - MENU No.17
Selects 1 of 15 DTMF codes. The DTMF codes are programmed with software and are up to 5 digits each.
(19) SCAN Resume Mode (Scan Mode) - MENU No.18
Thanks to this function, P10UV can SCAN in frequency or channel mode. You can choose amongst three options:
• Time-operated SCAN
Whenever a signal is detected, the radio will suspend the SCAN for 5 seconds, and then will continue to SCAN even if the
signal is still present.
• Carrier-operated SCAN
Whenever a signal is detected, the radio will stop scanning. It will resume to SCAN once the signal will disappear.
• Search -Search SCAN
The radio will stop scanning once a signal is detected.
(20) PTT-ID (PTT-ID) - MENU No.19
26