Opening Your Aspire G7200; Removing And Installing The Bezel Door - Acer GT7700-UQ9300A User Manual

58

Opening your Aspire G7200

Caution: Before you proceed, make sure that you have turned off your
computer and all peripherals connected to it. Read the "Preinstallation
instructions" on page 56.
You need to open your computer before you can install upgrade components.
The side panel is removable to allow access to the computer's internal
components. Refer to the following section for instructions.

Removing and installing the bezel door

To remove the bezel door:
1 Turn off your computer and unplug all cables.
2 Remove the four screws that hold the door hinges to the side panels.
3 Detach the bezel door and hinges from the system.
6 Upgrading your computer