Connect a monitor
To connect a monitor, simply plug the monitor cable into the DVI port
located on the rear panel of your computer. If you have a monitor that supports
S-video, plug the monitor cable to the S-video port located on the rear panel of
your computer.
Note: Refer to the monitor manual for additional instructions
and information.
Connect to a broadband network
The two Gigabit Ethernet ports on the rear of the computer can be used individually,
combined, or configured in a number of ways depending on your needs. With the system's
onboard NVIDIA nForce chipset and DualNet technology, you can combine the two
network ports to work as one. It also allows your computer to serve as a home gateway and
it provides advanced networking features including teaming, load balancing, fail-over, and
TCP/IP acceleration.
31