Vga Module Removal; Vga Module Installation - Acer Aspire Z1620 Service Manual

VGA Module Removal

Prerequisite:
WLAN Module Removal
Camera Module Removal
1. Disconnect VGA cable (B) from mainboard connector (D). (Figure 3-40)
2. Disconnect VGA cable (B) from VGA module connector (F).
3. Remove cable (B) from guide (C) on EMI SIDE.
4. Remove screws (E) from main frame.
5. Remove VGA module (A) from mainboard.
B
C
Figure 3-40. Remove VGA module from mainboard

VGA Module Installation

1. Install VGA module (A) to mainboard. (Figure 3-40)
2. Install and secure screw (E) to main frame.
3. Connect VGA cable (B) to VGA module connector (F).
4. Connect VGA cable (B) to mainboard connector (D).
5. Secure VGA cable (B) to guide (C) on EMI side.
6. Install camera module.
ID
E
F
E
D
Size Quantity
M2.5x4
A
Screw Type
1
91