DOS Flash Utility
To use the DOS Flash Utility, perform the following:
1.
Press F2 during boot to enter Setup Menu.
2.
Select Boot Options to modify boot priority order.
3.
Move Removal Device to 1st Boot Device position (Figure 2-15). (Refer to
menu)
Main Advanced Power Security Boot Options Exit
Boot Priority Order
st
1
Boot Device
nd
2
Boot Device
rd
3
Boot Device
th
4
Boot Device
th
5
Boot Device
EFT Device Priority
Hard Disk Driver Priority
Optical Disk Driver Priority
Removeable Device Priority
Network Device Priority
Quiet Boot
Halt On
Figure 2-15. Change BIOS Boot priority Order
4.
Copy the BIOS file to USB HDD.
5.
Insert the USB HDD and reboot computer to DOS mode.
6.
Execute A to update BIOS.
NOTE:
During update, do not press any keys.
7.
When flash is complete, system will restart automatically when finished.
BIOS Setup Utility
[EFI Device]
[Hard Disk]
[CD&DVD]
[Removeable Device]
[LAN]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Enabled]
[All, but Keyboard]
Version 2.10.1207. © Copyright 2002-2011, Acer Inc.
Boot Options
Specifies the Boot Device
Priority sequence from EFI
Boot Devices.
→←↑↓:Move
Enter:Select
+/-/space:Change Opt.
F7:Load User Defaults Setting
F8:Save as User Default
Setting
F9:Load Optimized Defaults
Setting
F10:Save & Exit Setup
ECS:Discard Change and Exit
Setup
53