Thermal Module Installation - Acer Aspire Z1620 Service Manual

Thermal Module Installation

＋IMPORTANT:
Apply approved thermal grease and make sure all heat pads are in place
before replacing module.
The following thermal grease types are approved for use:
1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and
Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU (D). (Figure 3-32)
NOTE:
Force used during installation of thermal module is sufficient to spread grease over CPU
top.
Figure 3-32. CPU Grease
3. Align and install thermal module (A) to mainboard screw holes. (Figure 3-31)
4. Secure captive screws (B/1 - B/4) in numerical order from one (1) to four (4) to
mainboard.
5. Install and secure screws (C) to thermal module on main frame.
6. Install EMI top.
ID
C
84
Size Quantity
M3.0x5.0
D
Screw Type
1