6.
If current password and new password strings do not match, the Setup Warning dialog is
shown (Figure 2-11). If it is not shown, go to step 7.
Figure 2-11. Changing a Password: Invalid Password
a. Press Enter to return to the BIOS Setup Utility Security menu.
b. The Supervisor Password parameter is shown as Clear.
c. To try to change the password again, repeat steps 1 through 4.
7.
If new password and confirm new password strings do not match, the Setup Warning dialog is
shown (Figure 2-12).
Figure 2-12. Changing a Password: Passwords Do Not Match
a. Press Enter to return to the BIOS Setup Utility Security menu.
b. The Supervisor Password parameter is shown as Clear.
c. To try to change the password again, repeat steps 1 through 4.
Setup Warning
Invalid Password.
[Continue]
Setup Warning
Passwords do not match.
Re-enter password.
[Continue]
49