Samsung SM-N960W User Manual page 289

Appendix
Hearing
Sound detectors
Set the device to vibrate when it detects your doorbell or a baby crying.
While this feature is enabled, the voice recognition will not operate.
Baby crying detector
Launch the Settings app, tap Accessibility → Hearing → Sound detectors, and then tap the
Baby crying detector switch to activate it. The device will vibrate when it detects sound and
the alert will be saved as a log.
Doorbell detector
1
Launch the Settings app, tap Accessibility → Hearing → Sound detectors, and then tap
the Doorbell detector switch to activate it.
2
Tap to make a recording of your doorbell.
The device will detect and record the doorbell.
3
Tap and ring your doorbell to check if it is recorded correctly. When the device detects
the doorbell sound, tap OK.
To change the doorbell sound, tap Change doorbell sound.
The device will vibrate when it detects sound and the alert will be saved as a log.
Setting light notification
Set the device to blink the flash or the screen when an alarm sounds or when you have
notifications, such as incoming calls or new messages.
Launch the Settings app, tap Accessibility → Hearing → Flash notification, and then tap
the switches next to the options you want to activate.
289