Elo Touch Solutions ET1717L User Manual page 6

Hide thumbs Also See for ET1717L:

Connector Panel & Interfaces

Touchmonitor Connections

1. Connect the VGA video cables between the monitor's VGA input connectors and your VGA

video source, respectively. Tighten the video cable's screws for best performance.

2. Connect the USB/serial touch cable between the monitor's USB/serial connector and your

PC's USB/serial port.

3. Select the correct power cable for your region. Connect the power cable between the AC

power source and the monitor's AC input power jack.

4. Alternatively, if you have purchased an optional power adapter and elected to use it, connect

the cable between the AC power source and the optional power adapter's input connector.

Connect the power adapter's DC output connector to the monitor's DC input power jack.

5. The touchmonitor ships in an OFF state. Press the power button to turn it on.

Table of Contents

Et1517l