Advertisement
Base Mount
For the 15 inch touchmonitor, a threaded three-hole mounting pattern for M4 screws is provided
on the bottom of stand base for mounting or securing. An additional two-hole pattern is available
under small caps on the top of the base. See page 15 for instructions on how to access holes.
For the 17 inch touchmonitor, a threaded three-hole mounting pattern for M4 screws is provided
on the bottom of stand base for mounting or securing. An additional two-hole pattern is available
under small caps on the top of the base. See page 15 for instructions on how to access holes.
Elo Touch Solutions | 670 N. McCarthy Blvd., Suite 100 | Milpitas, CA 95035 | 800 ELO TOUCH | +1 408 597 8000 | www.elotouch.com
Advertisement
