Page 1
User Manual Troubleshooting (Ref model: 190TS2LB) 190TS2 220TS2...
Page 2
Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed products available today. We’ll do everything in our power to keep you happy with your purchase for many years to come.
Important safety instructions Read and keep these instructions. Heed all warnings. Follow all instructions. Do not insert any strange object into the ventilation slots.This might lead to damage of the Monitor. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings.
Page 5
Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
EN-6 Environmental care End of life directives - Recycling Philips has paid a lot of attention to producing an environmentally friendly product. Your new Monitor contains several materials that can be recycled for new uses. At the end of its life, specialized companies can dismantle and recycle this set.
Your Monitor This section gives you an overview of commonly- used Monitor controls and functions. Monitor overview Front controls and indicators POWER / Power indicator SOURCE MENU CHANNEL +/- VOLUME +/- Remote control sensor Side connectors HDMI-1 PC IN AUDIO CV IN Video Video...
Wall mount the Monitor B Warning Wall mounting of the Monitor should only be Philips Electronics N.V. bears no responsibility for improper mounting that results in accident or injury. HDMI-1 PC IN...
Page 9
Step 1 Purchase a VESA-compatible wall bracket According to the size of your Monitor screen, purchase one of the following wall brackets: Monitor VESA-compatible screen size wall bracket type 19” / 22” 75 x 75mm Step 2 Remove the Monitor stand D Note These instructions are only applicable to Monitor with TV tuner models with mounted stands.
Install the remote control batteries Open the battery cover on the back of the remote control. Insert the 2 batteries supplied. Make sure the + and - battery ends line up correctly (the polarity is marked inside the compartment). Close the cover. Connect the PC, antenna or cable Connect to PC HDMI-1...
Connect the AC power cord B Warning Verify that your voltage corresponds with the voltage printed at the back of the Monitor. Do not insert the AC power cord if the voltage is different. To connect the AC power cord AC IN Locate the power connector at the back of the Monitor.
Use your Monitor This section helps you perform basic Monitor opera- tions. Switch your Monitor on/off or to standby To Switch the Monitor on If the standby indicator is off, touch . POWER at the front of the Monitor. If the standby indicator is on, press . on the remote control.
Watch channels from a cable receiver Switch on the cable receiver box. The picture from your cable receiver box might appear automatically on your screen. Use the remote control of your cable receiver box to select channels. If the picture does not appear Press SOURCE to select the correct source.
8. ZOOM Selects a picture format. See Change Picture format section. 9. SLEEP Sets the Monitor to turn itself off within a certain time. 10. DUALI-II Selects Mono, Stereo, Dual I, Dual II, Nicam Mono, Nicam Stereo, Nicam Dual I, Nicam Dual D Note The sound mode selections depend on TV program and broadcast TV channel of that region.
Set the channel menu This section describes how to set the channel menu. Enter Setup menu. Channel or OK to enter. Auto search Video Update search Manual search Audio Channel lock Channel skip Feature Program swap Channel D Note The Channel menu is available for TV input only. Summary of channel settings Auto search - Automatically sets up the TV for the broadcast or cable channels available in your...
Adjust video settings This section describes how to adjust your video settings. Enter Setup menu. Video OK to enter. Preset Video Brightness Contrast Audio Color Sharpness Feature Noise reduction Color temp. Channel Size OK to enter the setting. OK to confirm the change. Press MENU to exit.
Change picture format Press ZOOM button on remote control to select the format best fit in with your contents. Press Î or ï to select a picture format. Wide screen Stretches the classic 4:3 format to 16:9. Displays the classic 4:3 format. Super zoom Removes the black bars on the side of 4:3 broadcasts with minimal distortion.
Adjust audio settings This section describes how to adjust audio settings. Enter Setup menu. Audio OK to enter. Preset Video Bass Treble Audio Balance Feature Virtual surround Channel Press Î or ï to select one of the audio settings, OK to enter the setting. OK to confirm the change.
Summary of feature menu The following feature menus can be configured. Depending on the format of the input source, some feature menus might not be available. Menu language - Selects a language for your on-screen interface. Menu timeout - Sets the time before the Setup menu disappears.
Connect devices This section presents a clear illustration about how to connect your Monitor with peripherals. Connection overview HDMI-1 PC IN AUDIO CV IN Video Video AV IN -1 Rear connectors 1. HDMI-1 HDMI input connectors for DVD players, digital receivers, game consoles and other high- definition devices.
Select connection quality This section describes how you can enhance your audio visual experience by connecting your devices with the best possible connectors. 7.2.1. HDMI - Highest quality HDMI produces the best audio visual quality possible. Both audio and video signals are combined in one HDMI cable, providing an uncompressed, digital interface between your Monitor and HDMI devices.
Connect devices This section describes how to connect a selection of devices with different connectors. Note that different types of connectors may be used to connect a device to your Monitor. The following sections describe examples only, other configurations are possible. When connecting composite or component cables, match the cable colors to the connectors on the Monitor.
Page 23
Connect DVD player or other video devices with component video connectors HDMI-1 HDMI-1 CV IN Video Video AV IN -1 AV IN -1 Connect DVD player with an HDMI connector HDMI-1 CV IN CV IN Video Video Video Video AV IN -1 AV IN -1 HDMI-1 HDMI-1...
Pixel policy BRIGHT DOT DEFECTS MODEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types BLACK DOT DEFECTS MODEL 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects*...
Glossary The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which Aspect Ratio resembles the aspect ratio in a movie theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can automatically switch between them.
Troubleshooting Symptoms Possible cause The Monitor is not No power or indicator light. connected to the power. Blue screen with HDMI HDCP authentication fail. connection. No sound is detected from Audio cable is not the PC. connected. Batteries are installed Monitor does not respond to incorrectly, or low battery the remote control.
Index AC power cord 11 Antenna 10 Batteries 10 Brightness 16 Cable 10 Care Environment 6 Screen 6 Channel Auto search 15 Color temp. 16 Contrast 16 Noise reduction 16 Overview Connection 20 Remote control 13 Monitor 7 PC mode 19 Picture format 17 Picture mode 16 Position the Monitor 8...
Need help?
Do you have a question about the 220TS2LB/75 and is the answer not in the manual?
Questions and answers