PARKIT360 Force 5k Manual page 12

INSERT BALL MOUNT
Reverse the Dolly to Level, then lower Ball Mount
fully into the Receiver Tube. Wiggle the handle up
and down to release Ball Mount friction.
Ensure that the Jack Post is off of the ground.
RE-TIGHTEN BALL MOUNT
Using the Toggle Switch, move the Dolly back & forth
slightly. Re-tighten Ball Mount. Repeat 2-3 times
or until you can't tighten anymore.
ENSURE CONNECTION IS
AS TIGHT AS POSSIBLE
BEFORE OPERATING!
11
REVERSE
READY!