Ii35 - Curtis G3 D500 Series User Manual

INSTALLATION INSTRUCTIONS
Connecting the Brewer Wiring (Units That Come from
the Factory Without a Power Cord Attached)
WARNING: Do not connect the power cord to the
power supply until instructed to do so.
Brewers With Power Connector Mounted to the Back
12
compatible with the electrical outlet installed in the
Brewers With Strain Relief Mounted to the Back
13 Remove the front cover by removing the screws that
hold it in place.
14 Loosen the strain relief on the back of the brewer.
15 Feed the power cable into the brewer. The brewer may
be wired for connection directly to a junction box or for
use with a power plug that connects to an electrical
outlet meeting the brewer SPECIFICATIONS.
16 Connect the wires on the power cable to the terminal
ELECTRICAL SCHEMATIC.
17 Tighten the strain relief and replace the front cover.
DECANTER/DISPENSER BREWERS, INSTALLATION INSTRUCTIONS - 200F
continued...
Style
varies
Front
panel
Terminal
block

II35

or
080519A