Vivotek FD816BA-HT User Manual page 219

storage_dbenabled
protocol_https
protocol_rtsp
protocol_sip
protocol_maxconnection
protocol_maxgenconnecti
on
protocol_rtp_multicast_sc
alable
protocol_rtp_multicast_ba
ckchannel
protocol_rtp_tcp
protocol_rtp_http
protocol_spush_mjpeg
protocol_snmp
protocol_ipv6
protocol_pppoe
protocol_ieee8021x
protocol_qos_cos
volalarm,temperatu
re,pir, visignal,
backup,smartsd
<product
dependent>
<boolean> 0/7
< boolean > 0/7
< boolean > 0/7
<boolean> 0/7
<positive integer> 0/7
<positive integer> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
"boot" = System boot
"motion" = Video motion detection
"networkfail" = network connection failure
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi" = Virtual input (Manual trigger)
"vadp" = VADP trigger
"di"= Digital input
"volalarm" = Audio detection
"temperature" = Temperature detection
"pir" = PIR detection
"visignal" = Video input signal loss.
"backup" = Backing up recorded files
"smartsd" = Lifetime detection of SD card
* Only available when [httpversion] >= 0301a
Media files are indexed in database.
Indicate whether to support HTTP over SSL.
Indicate whether to support RTSP.
Indicate whether to support SIP.
The maximum number of allowed
simultaneous connections.
The maximum general streaming connections .
Indicate whether to support scalable multicast.
Indicate whether to support backchannel
multicast.
Indicate whether to support RTP over TCP.
Indicate whether to support RTP over HTTP.
Indicate whether to support server push
MJPEG.
Indicate whether to support SNMP.
Indicate whether to support IPv6.
Indicate whether to support PPPoE.
Indicate whether to support IEEE802.1x.
Indicate whether to support CoS.
VIVOTEK
User's Manual - 219