SECTION 9: PROCEDURES
9.1
ARRIVALS AND DEPARTURES
Load and Activate a Departure Procedure
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'SELECT
DEPARTURE'.
3) Press the ENT Key.
4) If a flight plan is active, the departure airport will
be displayed as the default. A list of available
departures is also displayed. If no flight plan is
active, use the FMS Knobs to enter the identifier
of the desired airport. Press the ENT Key.
5) Turn the large FMS Knob to highlight the
Departure field. Turn the small FMS Knob to
display a list of available departures.
6) Turn either FMS Knob to select the desired
departure and press the ENT Key.
Figure 9-1 Select Departure
7) A list of runways may be displayed for the
departure. Turn either FMS Knob to select the
desired runway and press the ENT Key.
8) A list of available transitions is displayed for the
departure. Turn either FMS Knob to highlight the
desired transition waypoint and press the ENT
Key.
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 9 – PROCEDURES
Figure 9-2 Select Departure Transition
9) With 'LOAD?' highlighted, press the ENT Key. The
departure will be active when the flight plan is
active.
Load and Activate An Arrival Procedure
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'SELECT
ARRIVAL'.
3) Press the ENT Key.
4) If a flight plan is active, the destination airport
will be displayed as the default. A list of available
arrivals is also displayed. If no flight plan is active,
use the FMS Knobs to enter the identifier of the
desired airport. Press the ENT Key.
5) Turn the large FMS Knob to highlight the Arrival
field. Turn the small FMS Knob to display a list
of available arrivals.
6) Turn either FMS Knob to select the desired arrival
and press the ENT Key.
Figure 9-3 Select Arrival
9-1