Invert And Activate A Stored Flight Plan; 8.16 Copy A Flight Plan; 8.17 Delete A Flight Plan; 8.18 Graphical Flight Plan Creation - Garmin G1000 Reference Manual

SECTION 8 – FLIGHT PLANNING
4) With 'OK' highlighted, press the ENT Key to
remove the waypoint. To cancel the delete
request, turn the large FMS Knob to highlight
'CANCEL' and press the ENT Key.
5) Once all changes have been made, press the FMS
Knob to remove the cursor.
8.15 INVERT AND ACTIVATE A STORED
FLIGHT PLAN
1) From the Flight Plan Catalog Page, press the FMS
Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the desired
flight plan.
3) Press the INVERT Softkey. 'Invert and activate
stored flight plan?' will be displayed.
4) With 'OK' highlighted, press the ENT Key. The
selected flight plan is now inverted and activated.
The original flight plan remains intact in its flight
plan catalog storage location.

8.16 COPY A FLIGHT PLAN

1) From the Flight Plan Catalog press the FMS Knob
to activate the cursor
2) Turn the large FMS Knob to highlight the flight
plan to be copied.
3) Press the COPY Softkey.
4) A 'Copy to flight plan #?' confirmation window is
displayed. With 'OK' highlighted, press the ENT
Key to copy the flight plan. To cancel, turn the
large FMS Knob to highlight 'CANCEL' and press
the ENT Key.
8-6
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III

8.17 DELETE A FLIGHT PLAN

1) From the Flight Plan Catalog Page, press the FMS
Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the flight
plan to be deleted.
3) Press the DELETE Softkey.
4) A 'Delete flight plan #?' confirmation window is
displayed. With 'OK' highlighted, press the ENT
Key to delete the flight plan. To cancel, turn the
large FMS Knob to highlight 'CANCEL' and press
the ENT Key.

8.18 GRAPHICAL FLIGHT PLAN CREATION

1) Press the FPL Key to display the Active Flight Plan
Page.
2) Press the Joystick to activate the map pointer. Use
the Joystick to move the pointer to the desired
point on the map to be inserted as a waypoint
in the flight plan.
3) Press the LD WPT Softkey. The selected waypoint
will be inserted at the end of the flight plan.
The default user waypoint naming is USR000,
USR001, USR002 and so on.
4) If the selected waypoint is to be placed elsewhere
in the flight plan, press the FMS Knob to activate
the cursor. Waypoints are inserted ABOVE the
cursor.
5) After placing the cursor at the desired point in
the list of waypoints, press the LD WPT Softkey.
6) To change the user waypoint name, follow the
procedure for modifying a user waypoint.