7.13 Nearest User Waypoint; Select The Nearest User Waypoint Page; Select A Nearest User Waypoint; 7.14 Nearest Frequencies - Garmin G1000 Reference Manual

SECTION 7 – NAVIGATION
2) Press the ENT Key. The selected VOR frequency
is placed in the NAV standby frequency field.
3) Press the FMS Knob to remove the flashing
cursor.

7.13 NEAREST USER WAYPOINT

Figure 7-54 Nearest User Waypoints Page

Select the Nearest User Waypoint Page

1) Turn the large FMS Knob to select the 'NRST' page
group.
2) Turn the small FMS Knob to select the fifth
rectangular page icon.

Select a Nearest User Waypoint

1) With the Nearest User Waypoint Page displayed,
press the FMS Knob to activate the cursor. If any
previously entered User Waypoints are within 200
nm, these will be displayed with the closest listed
first.
2) Turn either FMS Knob to select the desired
waypoint. The remaining information on the
7-22
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
Nearest User Waypoint Page pertains to the
selected Nearest User Waypoint.
3) Press the FMS Knob to remove the flashing
cursor.

7.14 NEAREST FREQUENCIES

Figure 7-55 Nearest Frequencies Page

Select the Nearest Frequencies Page

1) Turn the large FMS Knob to select the 'NRST' page
group.
2) Turn the small FMS Knob to select the sixth
rectangular page icon.

Select and Load the Nearest ARTCC, FSS, or

Weather Frequency

1) With the Nearest Frequencies Page displayed,
press the ARTCC, FSS, or Wx Softkey to place the
cursor in the appropriate field.
2) Turn the FMS Knobs to select the desired facility
or frequency.
3) Press the ENT Key to load the frequency into the