Updating Firmware - Speco H6HRL Quick Start Manual

If the web has a more recent firmware version than your recorder's build date, then please update your device to the
latest firmware.

3.2 Updating Firmware

1. Copy the upgrade software into the USB storage device.
2. Insert the USB storage device into the USB interface of the DVR.
3. Click Start→Settings→System→Maintenance→Upgrade to go to "Upgrade" interface. Select the USB device in
"Device Name" option and go to the path where the upgrade software exists. Select the upgrade software and
then click "Upgrade". The system may automatically restart during upgrading. Please wait for a while and do not
power off the DVR during upgrading.
After firmware is updated, the unit will restart. You can now remove the USB disk from the unit.
4. EZ Setup
After the system boots up, the EZ Setup wizard is displayed. See Figure
Figure 3-3
4
. If not, right click, and select EZ Setup.
4