Paslode Positive Placement PF150S-PP Operating Manual And Schematic
  1. Manuals
  2. Brands
  3. Paslode Manuals
  4. Nail Gun
  5. Positive Placement PF150S-PP
  6. Operating manual and schematic

Paslode Positive Placement PF150S-PP Operating Manual And Schematic

Metal connector nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT!
DO NOT DESTROY
It is the customerʼs responsibility to have all
operators and service personnel read and
understand this manual.
PRINTED IN U.S.A.
© 2017, Illinois Tool Works Inc.
515031-1
04/17
®
Positive Placement
Metal Connector Nailer
MODEL PF150S-PP
OPERATING MANUAL AND
SCHEMATIC
1
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Positive Placement PF150S-PP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Paslode Positive Placement PF150S-PP

Summary of Contents for Paslode Positive Placement PF150S-PP

  • Page 1 ® Positive Placement ® Metal Connector Nailer MODEL PF150S-PP IMPORTANT! OPERATING MANUAL AND DO NOT DESTROY SCHEMATIC It is the customerʼs responsibility to have all operators and service personnel read and understand this manual. PRINTED IN U.S.A. © 2017, Illinois Tool Works Inc. 515031-1 04/17...

  • Page 2: Table Of Contents

    INTRODUCTION The PASLODE PF150S-PP Positive Placement Metal Connector Nailer is a quality- ® ® built tool designed for use in residential framing applications. This tool will deliver efficient, dependable performance when used according to the manufactureʼs facturerʼs guidelines. Please study this manual, including the safety instructions, to fully understand the operation of this tool.

  • Page 3: Tool And Fastener Specifications

    TOOL AND FASTENER SPECIFICATIONS TOOL SPECIFICATIONS MODEL NO. PF150S-PP (Part# 502300) 11.7” HEIGHT 3.7” WIDTH LENGTH 17.4" WEIGHT 6 lbs. 5 oz. OPERATING PRESSURE 90 to 120 psi (6.2 to 8.3 bar) 30 Degree, Strip MAGAZINE TYPE FASTENER SPECIFICATIONS NAIL LENGTH 1-1/2”...

  • Page 4: Safety Instructions

    WARNING Failure to follow any of the above instructions could result in severe personal injury to tool user and bystanders or cause damage to tool and property. Contact your local Paslode Representative for a presentation of Paslodeʼs Safety Awareness Program.

  • Page 5: Tool Installation And Operation

    After each fastener is driven, completely release ■ the trigger and lift the tool from the work surface. 6. If this tool does not work when it is first connect- ed, do not try to make repairs. Call your Paslode representative immediately.
  • Page 6 TOOL OPERATION - continued Nose Probe The nose probeʼs unique design allows you to locate the hole on the metal connector. Place the nose probe into the hole of the metal connector. Hold the tool perpendicular to the metal connector. Depress the work contacting element and hold it against the work surface then pull the trigger.

  • Page 7: Air Systems

    -Be certain that: Filter/Regulator/Lubricator Units Filter/regulator/lubricator units that can supply • All pipes supplying air have a large enough enough air and protection for Paslode tools inside diameter to ensure adequate air supply. must meet the following specifications: • •...
  • Page 8 Use the air consumption chart in the Tool Schematic for each tool when calculating the For example, given a 20 hp electric compressor operating requirements for the tools. Paslode supplying approximately 80 cfm of air at 120 psi tools are designed to operate efficiently...

  • Page 9: Features And Benefits

    S-PP FEATURES AND BENEFITS Compact Design Able to get into tight spots. Nose Probe Locates hole and guides nail as it is driven. Tool-less Adjustable Exhaust Cap Lock-Out Deflects air away Eliminates blank firing. from user. Promotes driver blade durability. Bypass Follower For fast 2-strip loading Comfort Grip...

  • Page 10: Exploded View And Spare Parts List

    Positive Placement ® PARTS LEGEND Metal Connector Nailer PF150S-PP 502300 502045 Valve Pin 502330 Main Valve Nut 196345 O-Ring 502304 Air Deflector 502043 Lower Valve Spool 502343 Wave Washer 092747 O-Ring 502339 S.H.C.S. #10-24 x 7/8” ▲ 403796 Roll Pin 1/8”x 1-1/4” 408302 Flat Washer 502060...
  • Page 11 Positive Placement ® Metal Connector Nailer PF150S-PP 502300 Piston Assembly #511589 Trigger Valve Assembly #502908 Trigger Assembly #502253 Poppet Assembly #502920 Torque Values IN/LBS Seal must be installed in this position.

  • Page 12: Maintenance

    Ensure that the required safety information on the tool ❑ possible, the following procedure should be used to warm is legible. up the tools. Use only Paslode approved fasteners in the tool, and ® ❑ Reduce the regulated air pressure to 30 psi. ❑...

  • Page 13: Warranty

    Open manual petcock (most Prevent accumulation of Drain air line filter(daily). air supply systems have such moisture and dirt. a valve). Fill with Paslode pneumatic Keep lubricator filled. Keep tool lubricated. tool lubricant. Part No. 403720. Wash with soap and water or Clean filter element-then blow...

  • Page 14: Troubleshooting

    Tools skips during operation - no fasteners are debris. driven from time to time. Make sure correct fasteners are being used. Use fasteners that meet Paslode specifications only. ® Increase air flow to tool -- use larger air lines (3/8 ID minimum).
  • Page 15 TOOL WARRANTY An Illinois Tool Works Company 155 Harlem Avenue Glenview IL, 60025 TOOL WARRANTY AND LIMITATIONS than • Probe...

  • Page 16: Accessories

    Part No. 219348 Safety Glasses Clear Part No. 401382 ® An Illinois Tool Works Company 155 Harlem Avenue Glenview, IL 60025 ® Paslode and Positive Placement are registered trademarks of ITW. ® All other trademarks are property of their respective owners.
  • Page 23 •...

This manual is also suitable for:

502300

Table of Contents