Disposal
When the device has become unusable, dispose of it in
accordance with the current statutory regulations.
Troubleshooting
In purchasing the digital soldering station, you have acquired a pro-
duct which has been designed to the state of the art and is operatio-
nally reliable.
Problems and malfunctions may, however, still arise.
For this reason, the following is a description of how you can elimi-
nate possible malfunctions yourself.
Always adhere to the safety instructions!
Fault
No display of the
soldering tip temperature
Appliance does not work • Is the mains switch illuminated
Incomprehensible
characters on the display
or no operation possible
30
Possible cause
• The temperature is outside of the
measurable range
• The soldering iron is not connected
• The soldering iron is defective.
when the device is turned on?
Replace the fuse
• The processor was disrupted.
Turn the device off and on again
(reset).