Acer TravelMate 430 Service Manual page 50

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
VGA Memory
Quiet Boot
Power on Display
LCD Auto Dim
F12 Boot Menu
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
42
Description
Sets the system time.
Sets the system date.
This field reports the memory size of system
base memory.
This field reports the memory size of the
extended memory in the system.
Extended Memory size=Total memory size-1MB
VGA Memory size=16MB
Control whether Customer Logo and Summary
Screen are displayed or not.
Auto: During power on process, the system will
detect if any display device is connected on
external video port. If any external display device
is connected, the power on display will be in CRT
(or projector) only mode. Otherwise the system
will be in LCD only mode.
Both: Simultaneously enable both the integrated
LCD screen and the system's external video port
(for an external CRT or projector).
Enabled: LCD brightness will automatically lower
to save more power when AC is not present.
Disabled: LCD brightness will NOT automatically
lower to save more power when AC is not
present.
This field decides whether the OEM POST
screen will have the following message: "Press
<F12> Change Boot Device" or not during user's
quiet boot.
Format/Option
Format: HH:MM:SS
(hour:minute:second) System Time
Format MM/DD/YYYY (month/day/
year)
System Date
The size is fixed to 640KB.
Enabled
Option: or Disabled
Auto
Option: or Both
Enabled
Option: or Disabled
Enabled
Option: or Disabled
Chapter 2