Removing The Pcmcia Slot - Acer TravelMate 360 Service Manual

10. Remove the two hex screws from the I/O port bracket, then remove the I/O port bracket from the main
board.
11. Detach the audio cover from the main board.

Removing the PCMCIA Slot

1. See " Removing the Battery Pack" on page 53
2. See " Removing the Hinge Caps" on page 58
3. See " Removing the Middle Cover" on page 58
4. See " Removing the Keyboard" on page 59
5. See " Removing the EMI Plate" on page 63
6. See " Removing the Upper Case" on page 67
7. See " Removing the Main board" on page 70
8. Disconnect the PCMCIA slot cable from the main board at CN22.
9. Loosen the three screws from the main board.
10. Detach the PCMCIA slot with a flat screw driver to loosen the latch.
11. Then remove the PCMCIA slot from the main board at CN20.
74 Chapter 3