Parameter
Operation Mode
ECP DMA Channel
Note:
1. This option item should be [---] if user chooses the Bi-directional and Standard mode.
2. When the device is disabled, all the sub-items will be showed with[---].
Chapter 2
Description
Sets operation mode of the parallel port.
Only set the parallel post operation mode BIOS Setup.
If set to be ECP mode, the Windows will assume the
parallel port as the ECP port.
Sets a DMA channel for the pringer ot operate in ECP
mode. This parameter is enabled only if Operation
Mode is set to ECP.
Options
Bi-directional, ECP, or
Standard
1 1 1 1 or 3
41