Removing the LCD Module
1.
See " Removing the Battery Pack" on page 53
2.
See " Removing the Hinge Caps" on page 58
3.
See " Removing the Middle Cover" on page 58
4.
Remove the two screws from the LCD coaxial cable.
5.
Disconnect the coaxial cable from the main board at CN20.
6.
Disconnect the inverter cable from the main board at CN8.
7.
Remove the four screws from the hinges and bottom of the unit as shown.
8.
Then remove the LCD module from the main unit.
60
Chapter 3