Acer TravelMate 360 Service Manual page 47

If you have Enabled 1394 Legacy Mode and system has one or two 1394 CD-ROM, you can choose boot
from 1394 CD-ROM.
Fast Boot-------------------------------------------------------- Fast Boot--------------------------------------------------------
Boot Menu------------------------------------------------------ Boot Menu Boot Menu------------------------------------------------------ Boot Menu
1394Legacy Modes----------------------------------------- 1394Legacy Modes-----------------------------------------
Boot From LAN------------------------------------------------ Boot From LAN------------------------------------------------
Boot Drive Sequence: Boot Drive Sequence:
1 1 ----------------------------------------------------------------[ Floppy Disk ] ----------------------------------------------------------------[ Floppy Disk ]
st st
2 2 --------------------------------------------------------------[ CD-ROM ] --------------------------------------------------------------[ CD-ROM ]
nd nd
3 3 --------------------------------------------------------------[ Hard Disk ] --------------------------------------------------------------[ Hard Disk ]
rd rd
4 4 th th ---------------------------------------------------------------[ LANDesk® Service Agent ] ---------------------------------------------------------------[ LANDesk® Service Agent ]
5 5 --------------------------------------------------------------[ 1394 CD-ROM ] --------------------------------------------------------------[ 1394 CD-ROM ]
th th
6 6 -------------------------------------------------------------[ 1394 CD-ROM] -------------------------------------------------------------[ 1394 CD-ROM]
th th
= Move highlight bar, = Move highlight bar, = Move highlight bar, = Move highlight bar,
Parameter
Fast Boot
Boot Menu
1394 Legacy Mode
Boot from LAN
Boot Drive Sequence
Note:
1. This option item should be add one or two 1394 CD-ROM devices if user chooses the Enable 1394
Legacy Mode and system have one or two 1394 CD-ROM.
2. When the 1394 Legacy is disabled, the sub-items will be not showed.
Chapter 2
Boot Sequence Boot Sequence Boot Sequence Boot Sequence Boot Sequence Boot Sequence Boot Sequence Boot Sequence
= Change setting, = Change setting, = Change setting, = Change setting,
Description
When this flag is set, the ACPI OS will communicate
with the BIOS to decide the next POST is Fast or
Diagnostic.
When this flag is set, the F12 will communicate with
the BIOS to decide can use F12 choose Boot
sequence.
When disable the flag, F12 will not show boot menu.
When enabled, you can choose use 1394 driver
host with appropriate boot image can boot this
computer.
When enabled, remote host with appropriate boot
image can boot this computer.
There are four priorities that can let the user to
specify the boot device sequence.
[Enabled [Enabled Enabled]/[Disabled ] Enabled]/[Disabled ]
Enabled Enabled Enabled Enabled
[Enabled [Enabled [Enabled [Enabled Enabled Enabled Enabled]/[Disabled ] Enabled Enabled Enabled Enabled]/[Disabled ] Enabled Enabled Enabled Enabled Enabled
[ [ [Disabled [Disabled Disabled]/[Enabled ] Disabled]/[Enabled ]
Disabled Disabled Disabled Disabled
[Disabled [ [Disabled [ Disabled]/[Enabled ] Disabled]/[Enabled ]
Disabled Disabled Disabled Disabled
F1 = Help F1 = Help F1 = Help F1 = Help
Enabled or Disabled
Enabled or Disabled
Disabled or Enabled
Disabled or Enabled
Page 1/1 Page 1/1 Page 1/1 Page 1/1
Options
39