Modifying Your Password; Restoring Initial Settings - BITMAIN ANTMAINER S19j Server Installation Manual

2. For Keep Settings:
Select "keep settings" to keep your current settings (default).
■
Unselect "keep settings" to reset the server to default settings.
■
3. Click the button and navigate to the upgrade file. Select the upgrade file, then click Update.
4. When the upgrade is completed, restart the server and it will turn to the setting page.

5.3 Modifying Your Password

To change your login password:
1. In System, click the Password tab.
2. Set your new password, then click Save.

5.4 Restoring Initial Settings

To restore your initial settings
1. Turn on the server and let it run for 5 minutes.
2. On the controller front panel, press and hold the Reset button for 10 seconds.
Resetting your server will reboot it and restore its default settings. The red LED will automatically flash once every 15
seconds if the reset is operated successfully.
- 18 -
S19j Server Installation Guide
5. Administering Your Server