Advertisement
A
NEUVIDEO
Receiver
POWER LED:
System power indicator.
q
DC 24V:
Connect the 24V/1A adaptor to the AC wall outlet for power.
w
HDBaseT™ IN:
Standard HDBaseT
e
direct interconnection method.
HDMI OUT:
HDMI output port where you connect the HDTV or monitor with HDMI cable.
r
IR IN:
Channel 1 IR Receiver. Connects with a Wideband IR Rx.
t
IR OUT:
Channel 2 IR Transmitter. Connects with a Wideband IR Tx.
y
RS-232:
Phoenix jack provides serial port control signal from a receiver or to a receiver.
u
SERVICE:
Manufacturer use only.
i
ETHERNET:
This slot provides Internet signal from transmitter or to transmitter.
o
CONNECTION SIGNAL INDICATOR LAMP:
a
• Illuminated: The Transmitter and Receiver have good connections.
• Flashing: The Transmitter and Receiver have poor connection status.
• Dark: The Transmitter and Receiver are not connected.
DATA SIGNAL INDICATOR LAMP:
s
• Illuminated: The HDMI signal has HDCP.
• Flashing: The HDMI signal is without HDCP.
• Dark: No HDMI signal.
OPERATION CONTROLS & FUNCTIONS
signal input port. Connects the HDBaseT
™
Transmitter with a UTP cable following the standard
™
5
Advertisement
