Table of Contents
Advertisement
Windows 7 and Vista
To access the drive from your Windows desktop:
Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map
the Network Drive.
a) Click the
Start
button.
b) Click Computer.
c)
On the Computer page, the drive should appear on the left hand column under Network as
AMPED_USB.
To Map the Network Drive:
a) Click the
Start
button.
b) Click Computer.
c)
Click
Map Network Drive
d) Select a drive letter (any), then enter in the folder field either of the following depending on which
USB port is being used:
\\AMPED_USB\usb3\
\\AMPED_USB\usb2\
e) If the drive fails to open, click
from the top bar.
or
\\router's LAN IP address\usb3\
or
\\router's LAN IP address\usb2\
browse
and locate
AMPED_USB
under Network.
49
Advertisement
Table of Contents
