Power Management; Environmental Requirements - Acer TravelMate 2100 Service Manual

AC Adapter
Item
Dynamic Output Characteristics
Turn-on delay time
Hold up time
Over Voltage Protection (OVP)
Short circuit protection
Electrostatic discharge (ESD)
Dielectric Withstand Voltage
Primary to secondary
Ground leakage current

Power Management

Power Saving Mode
Standby Mode
Enter Standby Mode when
1.Standby/Hibernation hot-key is pressed
and system is not ready to enter Hibernation
mode.
2.System standby/ Hibernation timer expires
and system is not ready to enter Hibernation
mode.
Hibernation Mode
Enter Hibernation Mode (suspend to HDD)
when
1.Hibernation hot-key is pressed and
system is ready to enter Hibernation mode
2.System Hibernation timer expires and
system is ready to enter Hibernation mode.
Display Standby Mode
Keyboard, built-in touchpad, and an external
PS/2 pointing device are idle for a specified
period.
Hard Disk Standby Mode
Hard disk is idle within a specified period of
time.

Environmental Requirements

Item
Temperature
Operating
Non-operating
Package storage
Humidity
Operating
Non-operating
Non-operating
Vibration
30
5 sec (@ 115Vac)
5ms (@115Vac, Full load)
29V
9.5A @19V output voltage
15KV (at air discharge)
8KV (at contact discharge)
2150VDC for 1 sec.
less than 250uA
The buzzer beeps
The Sleep indicator lights up
All power shuts off
The display shuts off
Hard disk drive is in standby mode.
(spindle turned-off)
°
+5~+35 C
°
-20~+65 C
°
-20~+65 C
20% to 80% RH, non-condensing
20% to 80% RH, non-condensing (Unpacked)
20% to 80% RH, non-condensing (Storage package)
Specification
Phenomenon
Specification
Chapter 1