Installation; Powering The Multiport Adapter - StarTech.com DKT30CHCPD Instruction Manual

Installation

Powering the multiport adapter

Power the multiport adapter by using one of the following methods:
Note: A Fast Role Swap function is available when using Power Delivery 3.0. This
function prevents USB data disruption when switching power sources (bus power to
USB-C power adapter or USB-C power adapter to bus power). For this function to work,
the host laptop must also support Power Delivery 3.0.
Bus power:
The multiport adapter is powered by the host laptop's USB-C port and
does not require a separate power adapter.
USB-C power adapter (Recommended):
laptop's power adapter to the USB-C port on the multiport adapter. The power adapter
will power the multiport adapter and pass power through to the host laptop.
Note: Some laptops may have specific charging requirements. If a laptop requires
60W of power and an adapter connected to the laptop consumes a portion of the
power requirement, the power supplied to the laptop will be reduced by the amount
of power supplied to the adapter. The laptop may not recognize the loss in power and
may cause a disruption in charging.. For more information about Power Delivery, refer
to the manufacturer of your hardware.
Connecting the multiport adapter using bus power
1. (OPTIONAL): Connect your peripherals to the multiport adapter (e.g., HDMI monitor,
USB device i.e. keyboard, or an RJ45 network device i.e. Ethernet).
Note: See
Product Diagram
2. Connect the USB-C host connector on the multiport adapter to a USB-C port on
your host laptop.
3. Depending on the host laptop's operating system (see Requirements), the multiport
adapter will automatically detect and install the required driver.
Connecting the multiport adapter using a USB-C power adapter
1. (OPTIONAL): Connect your peripherals to the multiport adapter (e.g., HDMI monitor,
USB device i.e. keyboard, or an RJ45 network device i.e. Ethernet).
Note: See
Product Diagram
2. Connect the USB-C host connector on the multiport adapter to a USB-C port on the
host laptop.
3. Connect the USB-C connector on the host laptop's power adapter to the USB-C port
on the multiport adapter.
Instruction Manual
Connect the USB-C connector on the host
(front view) for port location and identification.
(front view) for port location and identification.
4