Sony SRS-NB10 Help Manual page 26

Help Guide
Wireless Neckband Speaker
SRS-NB10
Connecting the neckband speaker with a paired computer via a BLUETOOTH
connection (Mac)
Supported operation systems
macOS Catalina (version 10.15)
Before proceeding, make sure of the following:
Set the speaker of your computer to on.
If the speaker of your computer is set to
When the speaker of your computer is set to on:
Press and hold the
1
(Power ON).
The neckband speaker turns on and the indicator starts flashing in blue.
When a BLUETOOTH connection is established with the previously connected device, you hear voice guidance
(BLUETOOTH connected).
On the computer, see if a BLUETOOTH connection is established with the neckband speaker. If not, proceed to
step .
On the computer, select the neckband speaker.
2
1.
Click [ (System Preferences)] - [Bluetooth] in the taskbar on the right-bottom of the screen.
(mute), sound does not output on the neckband speaker.
(power)/ (BLUETOOTH) button for about 2 seconds until you hear voice guidance
26