Sony SRS-NB10 Help Manual page 22

Hint
The above instructions are provided as an example. For details, refer to the operating instructions supplied with your computer. In
addition, not all the computers are tested and found compatible with the above procedure and the procedure is not applicable to
home-built computers.
Note
If sound quality of music playback is poor, make sure that the computer is configured to enable the BLUETOOTH profile for music
playback (A2DP). For details, refer to the operating instructions supplied with your computer.
If the previously connected BLUETOOTH device is nearby, turning on the neckband speaker may automatically establish a
BLUETOOTH connection with the device. In such a case, turn off the BLUETOOTH function on the previously connected
BLUETOOTH device or turn off the device.
If the neckband speaker fails to establish a BLUETOOTH connection with your computer, delete the pairing information of the
neckband speaker from the computer and then pair them all over again. For details of operations on the computer, refer to the
operating instructions supplied with your computer.
Related Topic
Connecting the neckband speaker with a computer via a BLUETOOTH
Listening to music of a device via BLUETOOTH connection
Terminating the BLUETOOTH connection (After use)
5-030-725-11(1) Copyright 2021 Sony Corporation
22
®
connection (Windows)