Sony SRS-XB10 Operating Instructions Manual

Sony SRS-XB10 Operating Instructions Manual

Hide thumbs Also See for SRS-XB10:

Advertisement

Quick Links

4-692-892-12(1)
Wireless Speaker
Operating Instructions
Mode d'emploi
Manual de instrucciones
SRS-XB10
BLUETOOTH connection
1
Set the unit to the pairing mode.
 Press
to turn on.
 Press and hold
beeps (about 3 seconds).
* Step  is unnecessary when using the unit for the first time.
To connect by One-touch (NFC)
NFC
ON
Listening with two units (Speaker Add function - double mode/stereo mode)
1
Preparation for two SRS-XB10 units.
Unit A
A
Unit B
B
Help Guide
(web document for a PC/smartphone)
http://rd1.sony.net/help/speaker/srs-xb10/h_zz/
2
Pairing the unit to your smartphone/iPhone.
until you hear
2
Set unit  and then .
 Press
A
 Press and hold
hear beeps (about 3 seconds).
 Press
B
 Press and hold
hear beeps (about 3 seconds).
Charging the unit
Charge the battery for the first time.
BLUETOOTH
BLUETOOTH
ON
SRS-XB10
3
Connect your smartphone/iPhone to unit / with the
to turn on.
until you
* The default is double mode.
to turn on.
To switch double mode/stereo mode (Lch/Rch)
until you
Close the cap firmly.
The cap plays a very important role in maintenance of the water
resistant performance.
Listening
Start playback.
Adjust the volume.
indicator lit.
Press
(/).
©2017 Sony Corporation Printed in China
* Check that the  mark is on
the upper side of the cap.
*

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Sony SRS-XB10

  • Page 1 To connect by One-touch (NFC) Listening with two units (Speaker Add function - double mode/stereo mode) Set unit  and then . Connect your smartphone/iPhone to unit / with the Preparation for two SRS-XB10 units. indicator lit.  Press Unit A to turn on.
  • Page 2 Connectez votre téléphone intelligent/iPhone à l’appareil / dont le témoin Préparez deux appareils SRS-XB10. est allumé. Configure la unidad  y luego la . Conecte su smartphone/iPhone a la unidad / con el indicador Preparación para dos unidades SRS-XB10. encendido.  Appuyez sur Appareil A/Unidad A pour le mettre en marche.
  • Page 3: What You Can Do With The Speaker

    By using the AUDIO IN jack (external input jack), you can enjoy music of portable audio devices, etc.  By connecting two SRS-XB10 speakers via BLUETOOTH, you can play audio in either stereo mode (stereo sound) or double mode. ...
  • Page 4: Parts And Controls

    Parts and controls...
  • Page 5: About The Indicators

    (power) PAIRING button 2. –/+ (volume) buttons 3. ADD button (play) button 5. N-mark (BLUETOOTH) indicator 7. L (left)/R (right) indicators 8. MIC (microphone) 9. CHG (charge) indicator 10. DC IN 5V jack 11. RESET button 12. AUDIO IN jack 13.
  • Page 6: Charging The Speaker

    Flashes quickly (3 The speaker enters the pairing mode. times a second) Flashes slowly The speaker is searching for a BLUETOOTH device to connect to. Flashes once Each time you press the –/+ (volume) button, the indicator flashes once. When you operate the -/+ (volume) button and the volume is set at the lowest Flashes 3 times or highest level, the indicator flashes 3 times.
  • Page 7 3. The CHG (charge) indicator lights up in orange while charging. When connecting the speaker to a USB device which has the ability to output in 500 mA, the charging time is about 4 hours and 30 minutes . The time may vary depending on the ambient temperature or conditions of use.
  • Page 8 Hint  A speaker that is in use can be charged if it is connected to a booted computer or AC outlet via a USB AC adaptor (not supplied). In this case, it may take longer to charge the battery than compared to the speaker is turned off depending on the conditions of use.
  • Page 9: Turning The Power On

    Turning the power on 1. Press the (power) PAIRING button. (BLUETOOTH) indicator flashes slowly in white. When you turn on the speaker for the first time after purchase or there is no pairing information stored in the speaker, the (BLUETOOTH) indicator will begin to flash quickly in white.
  • Page 10: Auto Power Off Function

    Auto power off function If the speaker is not connected to a BLUETOOTH device via BLUETOOTH and an audio cable is not connected to the speaker's AUDIO IN jack for 15 minutes, the speaker turns off automatically. Note  When the speaker is connected to a BLUETOOTH device via BLUETOOTH or an audio cable is connected to the speaker’s AUDIO IN jack, the auto power off function is disabled.
  • Page 11: Pairing And Connecting With A Bluetooth Device

     Connecting with a paired BLUETOOTH device Connecting the speaker with an NFC-compatible device by One-touch (NFC) By touching the speaker with an NFC-compatible device such as a smartphone or Walkman,etc., the speaker is turned on automatically and then proceeds to pairing and making a BLUETOOTH connection.
  • Page 12 The speaker can be paired with up to 8 BLUETOOTH devices. When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device. Before operating the speaker, be sure to do the following:  Place the BLUETOOTH device within 1 m (3 ft) of the speaker. ...
  • Page 13: Connecting With A Paired Bluetooth Device

    3. Perform the pairing procedure on the BLUETOOTH device to detect the speaker. When a list of detected devices appears on the display of the BLUETOOTH device, select “SRS-XB10.” If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”...
  • Page 14  If the speaker was previously paired with a different device, turn off the BLUETOOTH function for the other device. 1. Turn on the speaker. (BLUETOOTH) indicator begins to flash in white. When you turn on the speaker, the speaker tries to make a BLUETOOTH connection with the last connected BLUETOOTH device.
  • Page 15: Connecting With An Nfc-Compatible Device By One-Touch (Nfc)

    Note  When the speaker made a connection automatically with the last connected BLUETOOTH device, the BLUETOOTH function may not work properly. In this case, terminate the BLUETOOTH connection by operating the connected BLUETOOTH device and reestablish a connection. Connecting with an NFC-compatible device by One-touch (NFC) By touching the speaker with an NFC-compatible device such as a smartphone, the speaker turns on automatically, then proceeds to pairing and BLUETOOTH connection.
  • Page 16 If the speaker is off, it will turn on when the device touches it. Follow the on-screen instructions to establish the connection. When the BLUETOOTH connection is established, (BLUETOOTH) indicator stays lit. To disconnect, touch the speaker with the device again. Hint ...
  • Page 17: Disconnecting The Nfc-Compatible Device By One-Touch (Nfc)

    Disconnecting the NFC-compatible device by One-touch (NFC) You can disconnect the speaker from the connected NFC-compatible device such as a smartphone or Walkman, etc. by touching the speaker with it. 1. Touch the device on the N marked part of the speaker. Hint ...
  • Page 18 Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly. It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Perform same procedures to pair to other devices. Do the following before starting.
  • Page 19 2. Turn on the speaker. (BLUETOOTH) indicator flashes in white. When you turn on the speaker for the first time after purchase, the (BLUETOOTH) indicator will begin to flash quickly in white and the speaker enters pairing mode automatically by just turning on the speaker. Proceed to step When you turn on the speaker, the speaker tries to make a BLUETOOTH connection with the last connected BLUETOOTH device.
  • Page 20 1. Select [Connect] in the Action Center on the right-bottom of the screen. Select [SRS-XB10]. If [SRS-XB10] does not appear on the screen, repeat the procedure from step After pairing, the BLUETOOTH connection establishes automatically and [Connected music] will be displayed on the screen.
  • Page 21 5. Check that the (BLUETOOTH) indicator has switched from flashing to a steady light. When the speaker is connected to the computer, the (BLUETOOTH) indicator stays lit. You can enjoy playing back music from your computer. Hint  The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the computer.
  • Page 22: Unable To Turn On The Speaker Or Charge The Built-In Battery

    The pairing information with the speaker has been deleted from the BLUETOOTH device. The speaker is initialized. All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your iPhone/iPod touch or computer. In this case, erase the pairing information of the speaker on your iPhone/iPod touch or computer, and then perform the pairing procedure again.
  • Page 23: Sound Becomes Low While In Use

     If the CHG (charge) indicator is flashing in orange, turn off the speaker and charge the battery sufficiently.  The device with a built-in radio or tuner cannot be connected to the speaker via BLUETOOTH since noise may occur in broadcasts. ...
  • Page 24: Using The Reset Button

    RESET button for about 2 seconds with a pin or other pointed objects. After pushing the RESET button, turn on the speaker. If it does not turn on, consult your nearest Sony dealer. Note ...
  • Page 25: Initializing The Speaker

    Initializing the speaker With the speaker turned on, press and hold the – (volume) button and the (power) PAIRING button at the same time for more than 5 seconds until the speaker turns off. The speaker is initialized. Settings such as volume, etc., are restored to the factory default settings, and all pairing information is deleted.

Table of Contents