Table of Contents
Advertisement
神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd
地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062)
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
705-XT32C0-00
Made in China
闪光灯功率遥控触发器
Wireless Power-Control Flash Trigger
XT32C For Canon / XT32N For Nikon
Instruction Manual
说
明
手
册
Chinese English Bilingual
中英文双语
Advertisement
Table of Contents
Related Manuals for Godox XT32
Summary of Contents for Godox XT32
- Page 1 闪光灯功率遥控触发器 Wireless Power-Control Flash Trigger XT32C For Canon / XT32N For Nikon 神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com...
- Page 2 Contents 兼容相机列表 XT32C可兼容以下佳能EOS系列的相机型号： 5D Mark III 5D Mark II Foreword Setting the Transmitter 650D 600D 550D 500D 450D For Your Safety Power Switch Names of Parts Power Switch of AF Assist Beam 1000D 1100D 400D Digital Body Channel Settings LCD Panel Group Settings XT32N可兼容以下尼康相机型号：...
-
Page 3: For Your Safety
(e.g. TT685 series, V860II series, AD360II series, AD600 series, QuickerII series, etc.). As Failure to observe the precautions listed in this section could result in damage to the to the flashes which do not have Godox wireless X system but have USB wireless control product. -
Page 4: Names Of Parts
For Your Safety Names of Parts Body extremely high temperature. Failure to observe this precaution could result in fire or damage to the casing or internal parts. Observe precautions when handling batteries LCD Panel Group/ PC Sync Socket Batteries may leak or explode if improperly handled. Observe the following precautions Channel/ Setting Button when handling batteries for use in this device:... -
Page 5: Using The Flash Trigger
Names of Parts Using the Flash Trigger LCD Panel 1. As a Wireless Flash Trigger through Hot Shoe 1.1 Mount the transmitter on camera hotshoe and turn it on before turning on the camera. 1.2 Set the transmitter and the receiver to the same channel by pressing Channel Setting Button. -
Page 6: Setting The Transmitter
Setting the Transmitter Setting the Transmitter Power Switch Channel Setting Slide the Power Switch to ON, and the device is 1. Short press the < > Button until the channel on and Status Indicator Lamp will not blink. When amount blinks. in idle use, the flash trigger will enter sleep mode 2. - Page 7 2. Fully press the <TEST> Trigger Button, and *As XT32 can control so many flashes and the Status Indicator Lamp turns red and the each flash has different power output level, flash on the receive end can be triggered.
-
Page 8: Maintenance
Setting the Transmitter Attentions 1. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly and Setting Custom Functions Power Switch is turned on. Check if the transmitter and the receiver are set to the same channel, if the hotshoe mount or connection cable is well connected, or if the flash Display Operation Settings and Description... -
Page 9: Technical Data
Compatible Camera Models Technical Data XT32C can be used on the following Canon EOS series camera models: Model XT32 5D Mark III 5D Mark II Compatible Cameras XT32C For Canon cameras / XT32N For Nikon cameras 650D 600D 550D 500D 450D Support for the cameras that have PC sync socket.
Need help?
Do you have a question about the XT32 and is the answer not in the manual?
Questions and answers