Thanks for your purchase of this XProN wireless flash trigger. Foreword Mode Settings This wireless flash trigger is suitable for using Nikon cameras to control Godox flashes Warning Magnification Function with X system e.g. camera flash, outdoor flash, and studio flash. It can also control...
Warning Names of Parts Body Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Group Button 1 Always keep this product dry. Do not use in rain or in damp conditions. LCD Panel Group Button 2 Keep out of reach of children.
Battery Names of Parts AA alkaline batteries are recommended. LCD Panel Installing Batteries As shown in the illustration, slide the battery compartment lid of the flash trigger and insert two AA batteries separately. /16 + 0.3 Battery Level Indication Check the battery level indication on the LCD panel to see the remaining battery level during the usage.
< > wireless icon will be displayed on the LCD panel. Long press the Note: Nikon original speedlights shall be set to i-TTL mode regardless of XProN's mode. - 29 - - 30 -...
Using the Flash Trigger Using the Flash Trigger 4. As a Wireless Studio Flash Trigger 5. As a Wireless Shutter Release Trigger Take GS400II as an example: Operation method: 4.1 Turn off the camera and mount the transmitter 5.1 Turn off the camera. Take a camera remote on camera hotshoe.
Using the Flash Trigger Setting the Flash Trigger Power Switch 6. As a Flash Trigger with 2.5mm Sync Cord Jack Operation method: Slide the Power Switch to ON, and the device is on and status indicator lamp will not 6.1 The connection method please refers to the reveal.
01 to 99. Output Value Settings Note: As the current Godox flashes do not have wireless ID setting functions, please set ID to OFF. 1. Multi-group displays in the M mode Mode Setting 1.1 Press the group button to choose the group, turn the select dial, and the power...
Setting the Flash Trigger Setting the Flash Trigger Flash Exposure Compensation Settings 6. Until all the amounts are set. Or during any value setting, short press the <MODE> button to exit the setting status. No values will blink. 1. Multi-group displays in the TTL mode 7.
1.1 When choosing IN, this sync socket will enable Zoom 24 SHOOT and long press the <CH/Zm> button again to back to the XProN to trigger flash. Zoom 24 main menu. 1.2 When choosing OUT, this sync socket will send...
Always lighting triggering signals to the slave unit, which is suitable SYNC Sync cord jack Enable XProN to trigger flash for multi person photography. However, this function consumes power quickly. Export triggering signal to trigger other remote control APP: Only send triggering signal when camera is and flash shooting (control the flash’s parameters by...
V860N XTR-16S 360j AD360II from TTL mode, being subjected V850 600j AD600 to the master flash when mixing Note: The range of support functions: the functions that are both owned by XProN and flash. - 43 - - 44 -...
Compatible Flash Models Technical Data The relationship of XT wireless system and X1 wireless system: Model XProN Compatible cameras Nikon cameras (i-TTL autoflash) XT-16 Support for the cameras that have PC sync socket. (Code Switch) Power supply 2*AA batteries Flash Exposure Control...
Attentions 1. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly Model XProN and Power Switch is turned on. Check if the transmitter and the receiver are set to Firmware upgrade Upgrade through the Type-C USB port...
Need help?
Do you have a question about the XProN and is the answer not in the manual?
Questions and answers