Uniden AT4801 User Manual page 24

Answering system basic setup
Auto attendant setup
To set the start and end time of auto attendant announcement:
You can set the start and end time of the daytime announcement. The system
plays the nighttime announcement in the rest of the time.
When the console is idle, press MENU
1.
2. Press or
/SKIP.
3. Press or
/SKIP.
4. Press or
/SKIP.
Press /REPEAT or /SKIP to scroll between the hour (HH), minute (MM)
5.
and AM/PM of start time and end time.
6. Press or
pm. You can also press the dialing keys to enter the correct digits.
• If you enter digits larger then 12 in the hour field, the system automatically
converts to the 12-hour time format.
SELECT to save the setting.
7. Press
MENU/
NOTE: The start time and the end time of the daytime announcement cannot be the same.
Otherwise, the setting cannot be saved.
to scroll to Ans sys setup, then press
to scroll to Auto att setup, then press
to choose Set annc time, then press
to increase or decrease the digits and toggle between am and
.
/SELECT
17
SELECT or
MENU/
SELECT or
MENU/
SELECT or
MENU/