Uniden AT4801 User Manual page 3

Introduction
System Overview
The following page illustrate a possible scenario of how your 4-line telephone
system can be setup in your workplace. The actual setup depends on the
environment and settings in your workplace.
Scenario
4-single-line connection, with nine AT480HS handsets
Your AT4801 console is placed in the reception. There are only
single-line wall jacks in your workplace. The 4 single-line cords (model RJ11;
purchased separately) are connected to L1, L2, L3, and L4 jacks of the console
and 4 single-line wall jacks.
Your AT4801 console is pre-assigned Ext. 0.
In your workplace, there are nine AT480HS handsets (Ext. 1,2,3,4,5,6,7,8,9)
registered to the console.
You can use any of the ten stations (Ext. 0, and 1-9) to make and receive a
call with any line from LINE 1, LINE 2, LINE 3, or LINE 4, according to your
preference and need.