Titan PGD2000 Operator's Manual page 16

11. Add approximately 4 tablespoons of new EP 0 grease to the crank area and reinstall the
crank cover bolts with new Loctite. You must clean the bolt and the area of the bolt hole
with parts cleaner to remove any grease residue. The Loctite will not be effective if grease
is present.
All screws should be correctly tightened in an alternate pattern as machine damage will occur from
loose or lost bolts due to improper installation.
Please contact Titan Post Drivers directly at (702) 293-4262 if you need parts or have any servicing
questions.
16