To use the cash register's basic function
Basic setups and registrations
To program basic settings
You can program basic settings in the PGM mode of the Mode switch.
Step
1
By turning the Mode switch to PGM position, the display
indicates the programming top menu.
2
?
>
Use
or
keys to choose the item you wish to set then
press
key.
F
Repeat the above step until the display shows an entry
display.
3
Input values you wish to set and press
The following table shows the setting items of the basic programming.
Program menus
Top menu
Sub menu
[DEPT Setting]
DEPT name [DEPT001
Unit Price [ 0.00 ]
Taxable Status [NON TAX]
Group Link [00]
High AMT Limit [0.00]
POP No. [ ]
Advanced
[PLU Setting]
PLU name [PLU0001
Unit Price [ 0.00 ]
Taxable Status [NON TAX]
Group Link [00]
DEPT Link [000]
Open PLU [NO]
Advanced
Display
key.
F
]
Single Item [NO]
0 Unit Price [NO]
Negative Price [NO]
]
Single Item [NO]
0 Unit Price [NO]
Negative Price [NO]
Min Stock [0]
OBR Code
[0000000000000]
E-32
What is to be set
Sets name, unit price, taxable status,
item group and high amount limitation
in each department.
See page E-35.
Sets name, unit price, taxable status,
item group, department link and open
PLU in each PLU.
See page E-37.