Output Settings - Fax - Epson L656 User Manual

Setting
Rings to Answer
Remote Receive
Parent topic:

Output Settings - Fax

Set the output options you want to use for incoming faxes.
Setting
Fax Output
Auto Reduction
Auto Rotation
Collation Stack
Options
1 to 9
Off
On
Setting Up Fax Features Using the Product Control Panel
Options
—
On
Off
On
Off
On
Off
Description
Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to for answering a call.
Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you enable this function, you
need to set a start code. If you are using a cordless
handset whose base is connected to the product, you
can start receiving the fax by entering the code on the
handset.
Description
Saves incoming faxes to a computer. To use this
option, you must use the Epson FAX Utility.
Select to reduce the size of large received faxes to fit
on the paper size in the selected paper source.
Select to print large incoming faxes at their original
size on multiple sheets, if necessary.
If you have loaded A5-size paper, select On to rotate
landscape-oriented incoming faxes so that they print
correctly on the paper.
Select On to print incoming faxes so that the pages
are stacked in the correct page order. (When the
product is low on memory, this option may not be
available.)
157