Step
Modem Module
BT Module
Mainboard
Thermal Module
Removing the Hinge Covers
1. See "Removing the Battery Pack" on page 49.
2. Remove the two screw caps and screws from the Hinge Covers.
Step
Hinge Covers
3. Slide the covers off the hinges in the direction of the arrows.
IMPORTANT:The left and right Hinge Covers are shaped differently and marked L and R on the inside. Ensure
that the correct cover is used during reassembly.
Removing the Switch Cover
CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is
recommended that only fingers are used to remove the Switch Cover.
1. See "Removing the Battery Pack" on page 49.
Chapter 3
Screw
M2*3
M2.5*3
M2.5*3
M2.5*5*3.2
Size
M2.5*4
Quantity
2
1
1
4
Quantity
2
Part No.
86.AD302.001
86.AD302.002
86.AD302.002
86.AD302.006
Screw Type
63