Subscribe to Our Youtube Channel
Related Manuals for Gamma Oculus 40
Summary of Contents for Gamma Oculus 40
- Page 1 Oculus 40 12x40w RGBW LED Wash with Pixel Mapping User Manual Oculus 40 – GAMMA LED Vision Page 1 of 12...
-
Page 2: Table Of Contents
Using the LCD Menu and Buttons......................6 DMX Setup................................6 DMX Basics...............................6 DMX Wiring..............................6 DMX Modes and Configuration........................8 Pixel Layout – 68 Channel Mode:......................10 3. Maintenance...............................11 Routine Maintenance............................11 Troubleshooting Problems...........................11 4. Technical Specifications..........................12 Oculus 40 – GAMMA LED Vision Page 2 of 12... -
Page 3: Introduction And Setup
Introduction and Setup Unpacking and In the Box Thank you for choosing our Oculus 40. For your own safety, please read this manual before installing or using the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions. Meanwhile, please keep this manual for future needs. - Page 4 ∙Warranty is voided if there are any malfunctions from not following the user manual while operating or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc. Oculus 40 – GAMMA LED Vision Page 4 of 12...
-
Page 5: Customer Support
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of purchase to be free of manufacturer and workmanship defects. Warranty does not cover normal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vision is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual. -
Page 6: Setup And Operation
DMX input on your first light. You may then connect your next fixture to the output of your first light, and continue the chain. Oculus 40 – GAMMA LED Vision Page 6 of 12... - Page 7 XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: Oculus 40 – GAMMA LED Vision Page 7 of 12...
-
Page 8: Dmx Modes And Configuration
DMX Modes and Configuration The Oculus 40 has multiple DMX modes, sometimes called “personalities”, “profiles”, or as we will use here “modes”. In general, modes with more DMX channels offer a greater level of control or options but take up more of your output channels on your lighting console or software. - Page 9 0-255 BG Dimmer 0-255 Overall Intensity for the background color. Zoom 0-255 7°-70° Reset No Function 10-255 Reset Reset with light off 1-239 No Function 240-255 Reset with Light Off Oculus 40 – GAMMA LED Vision Page 9 of 12...
-
Page 10: Pixel Layout - 68 Channel Mode
Pixel Layout – 68 Channel Mode: Center is 1-3, Clockwise Outer Ring is 4-12, Clockwise: Oculus 40 – GAMMA LED Vision Page 10 of 12... -
Page 11: Maintenance
Plug the light directly into the DMX controller with a cable that you know is good. • Unplug all other lights – does it work? Try to use another DMX controller. • Oculus 40 – GAMMA LED Vision Page 11 of 12... -
Page 12: Technical Specifications
• Pan: 540° (16bit) Electric correction • Tilt: 270° (16bit) Electric correction • Zoom range: 7°-70° • Dimmer: 0-100% dimmer • Display panel: Blue LCD screen • Net weight: 14.5kg • Oculus 40 – GAMMA LED Vision Page 12 of 12...
Need help?
Do you have a question about the Oculus 40 and is the answer not in the manual?
Questions and answers