Philips BDM4037U User Manual page 9

2. Setting up the monitor
For example, if you selected [Audio
Source] as the function, toggle down ,
the [Audio Source] menu appears.
 
 
 


Independent audio playback,
3
regardless of video input
Your Philips Display can play the audio
source independently under PIP / PBP
mode, regardless of which video input.
For example, you can play your MP3
player from the audio source connected
to the [Audio In] port of this Display, and
still watch your video source connected
from [MHL-HDMI 1.4], [MHL-HDMI 2.0],
[DisplayPort1] or [DisplayPort2].
1. Toggle to the right to enter OSD
menu screen.





 



2. Toggle to the up and down to select
main menu [Audio], then toggle to
the right to confirm.
3. Toggle to the up and down to select
[Audio Source], then toggle to the
right to confirm.
 
U
 
 
 


4. Toggle to the up and down to
select your preferred audio source:
[Audio In], [MHL-HDMI 1.4], [MHL-
HDMI 2.0], [DisplayPort1] or
[DisplayPort2].
5. Toggle to the right to confirm your
selection.
Note
The next time you turn on this Display,
it will by default select the audio source
you previously selected. In case you
want to change it, you will have to go
through the selection steps again to
select your new preferred audio source
as the default.
Description of the On Screen Display
4
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in
all Philips LCD Displays. It allows an end
user to adjust screen performance or
select functions of the Displays directly
through an on-screen instruction
window. A user friendly on screen
display interface is shown as below:


 
 






7