Philips BDM4037U User Manual page 13

2. Setting up the monitor
3. Toggle to the up or down to select
[PIP / PBP Mode], then toggle to the
right.
4. Toggle to the up or down to select
[Off], [PIP], [PBP
4Win], then toggle to the right.
5. Now you can move backward to set
the [Off], [PIP],
4Win].
6. Toggle to the right to confirm your
selection.
MultiView in OSD menu
• PIP / PBP Mode: There are five
modes for MultiView:[Off], [PIP],
[PBP 2Win], and [PBP 4Win].
[PIP]: Picture in Picture
Open up a sub-window
side-by-side of other
signal source.
When the sub source is
not detected:
[PBP 2Win]: Picture by Picture
Open up a sub-window
side-by-side of other
signal sources.
When the sub source is
not detected.
[PBP 4Win]: Picture by Picture
2Win], or [PBP
[PBP 2Win], or [PBP
A
(main)
A
(main)
A B
(main)
A
(main)
Open up three sub-
windows of other signal
sources.
When the sub sources
are not detected.
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
• PIP Size: When PIP is activated,
there are three sub-window sizes to
choose: [Small], [Middle], [Large].
B
B
• PIP Position: When PIP is activated,
there are four sub-window positions
to choose.
Top-Right
Top-Left
B
• Swap: The main picture source and
the sub picture source swapped on
the display.
11
A
B
Small
Middle
A
Large
(main)
Bottom-Right
B
A
(main)
Bottom-Left
A
(main)
B
C
(main)
B D
A
(main)
A
(main)
B
A
(main)