Date & Time Set Procedure; Using The Arm Cuff - HoMedics Walgreens BPS-420WGN Manual

DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
located on the back of the monitor.
2. The display will show a blinking number showing
the date. Change the month by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button
to confirm the entry, and the screen will show a blink-
ing number representing the day of the month.
3. Change the date and time as described in Step 2
above, using the
bers and the Set button
4. A "0" will reappear as the blood pressure monitor is
ready for measurement again.
repeat process to set date and time
again
button to change the num-
to confirm the entries.
Press the button
blinking month
increasing month
confirm the entry
13

USING THE ARM CUFF

Very Important: Proper cuff size is critical to accurate
measurement.
,
This monitor comes with a Standard Size
arm cuff that fits arms with circumferences
of 9.5"–14.2" (24 cm – 36 cm).
This cuff is suitable for your use if the colored arrow
falls within the solid color line as shown below.
If the Arrow falls outside of the Solid Color Line, you
need a cuff with another circumference. Contact
HoMedics Consumer Relations at 1-800-466-3342.
Colored Arrow
Solid Colored Line
14